1007 whitehead road ext., trenton, nj 08638 tel: (609) 538-8586 ? fax: (609) 538-8587 email: sales@stealthmicrowave.com ? web site: www.stealthmicrowave.com model SM2023-41L 2000-2300 mhz 12w linear power amplifier for umts applications parameter specification frequency range 2.0 ? 2.3 ghz (100 mhz bands) pout (p1db) + 41 dbm (min.) third order intercept point + 58 dbm linear gain 55 db 1 db gain flatness over full band .5 db gain change over tem p erature .5 db input/output return loss -18 db / -18 db dc input voltage + 12 volts dc input current, typ. 4.5 amps level control (optional) 20 db (min.) mechanical dimensions 7.5 x 5.0 x 3.3 inches rf connectors sma female operating temperature 0oc to +55oc operating humidity 95% non-condensing operating altitude up to 10,000 feet above sea level the SM2023-41L is a 2.0 to 2.3 ghz solid state gaas amplifier designed for the universal mobile telecommunication systems (umts) market. the amplifier provides 55 db of linear gain with a gain flatness of 0.5 db, +41 dbm of output power at p1db, and an oip3 of +58 dbm. by using the latest surface mount technologies, this small amplifier can easily fit into tightly packed transmitters and repeaters. the unit is available in modular form (standard), or as a rack mountable amplifier. features ? single power supply ? over/reverse voltage protection ? thermal protection with auto reset ? temperature compensation ? integral output isolator options ? forward/reverse power detection ? rf sampling ? logic on/off control ? integral heatsink
1007 whitehead road ext., trenton, nj 08638 tel: (609) 538-8586 ? fax: (609) 538-8587 email: sales@stealthmicrowave.com ? web site: www.stealthmicrowave.com model SM2023-41L 2000-2300 mhz 12w linear power amplifier for umts applications dimensions in inches pin description values rf input input connector (sma female) -13 dbm, typical rf out output connector (sma female) + 41 dbm @ p1db rf sample sample rf port (sma female) 30 dbr gnd ground turret --- rev reverse power detector vswr @ + 38 dbm + 2.5 volts fwd forward power detector + 38 dbm output power + 2.5 volts +12vdc dc input voltage + 12 volts @ 4.5 amps (typ.) on/off ttl logic on/off 0 volts = off, + 5 volts = on specifications subject to change without notice.
|
